TerraMax920 – Advanced Polymer Wood Floor Adhesive

TerraMax 920 Wood Floor Adhesive is an advanced polymer adhesive containing 100% solids. The product provides strong adhesion and shear strength – while containing no solvents and low VOCs. It is formulated for interior installation of all types of wood flooring including solid wood, engineered wood up to 3/4 in. thick, and bamboo flooring – as well as acrylic flooring. TerraMax 920 Wood Floor Adhesive is a favorite of installers, because the one component formulation doesn’t require ash time, yet makes it easy to spread and easy to clean up.


  • Single-Component, No mixing
  • Ease of spread
  • Easy clean-up
  • VOC Compliant / Low VOC’s
  • Anti-microbial Formula


  • Engineered hardwood flooring
  • Acrylic impregnated hardwood flooring
  • Finished & unfinished solid wood
  • Parquet
  • Bamboo



  • 1 Gallon Pail: 60 pails/pallet
  • 3.5 Gallon Pail: 48 pails/pallet
  • 4 Gallon Pail: 48 pails/pallet
  • 5 Gallon Pail: 36 pails/pallet
  • 55 Gallon Drum


Read and understand data sheet completely before beginning installation. Follow industry standards, as well as flooring manufacturer’s recommendations for acclimation, design, layout and application of flooring material. If jobsite conditions are outside of flooring manufacturer’s recommendations, take necessary corrective actions.


Surfaces must be clean, dry and at, free of voids, projections, loose materials, oil, grease, sealers and all other surface contaminants. Completely remove any adhesive residue or surface contamination by diamond grinding, shot blasting or scarifying. To ensure proper adhesion to concrete, surface texture must be similar to light broom finished; concrete should NOT be smooth or reflective. Areas requiring patching or leveling must be done using a Portland cement-based material. Maximum acceptable floor variation is 3/16” in 10 feet.


Under normal conditions, light foot traffic is acceptable after 6 to 8 hours; normal traffic after 12-16 hours.

Storage / Shelf Life

Material is to be stored under controlled dry environment (below 75° F). Use within 6 months from date of manufacture, if stored in unopened container. Do not freeze.


As you work, immediately clean any adhesive from pre-finished flooring with mineral spirits (be careful not to harm finish).


Do not use on wet, dusty, contaminated, glassy smooth or friable substrates; do not use over substrates/slabs treated with sealers or curing compounds; do not use in areas subject to hydrostatic head.

Trowel Selector Guide

Trowel size is suggested to maximize coverage of adhesive. Periodically check coverage of adhesive during installation: >80% coverage is required for all engineered wood flooring; >95% coverage is required for all solid wood flooring products. Please note: It is the installer’s responsibility to apply the proper amount of adhesive for the job condition.